Aluminum medicine bottle cap --mechanical press machine with
feeding line
Cap making line includes following parts:
this whole complete line includes mechanical press/punching
machine, muti-cavity punching die, cap aluminum coil holder frame,
aluminum coil brush oil, blow finished cap, pull coil material
servo control system, pull coil material, waste/useless material
coilling, separate aluminum cap and waster/useless ring--the caps
come out, the waster rings stay in the collection box, die
protection system: during punching, it can protect die, if any cap
is wrong, this system will stop the machine to protect die
Application:
This cap professional line is specially designed for plastic mold,
medicine bottle cap, wine bottle cap, cosmetic cap, it is used with
high-speed punching machine
Machine configuration:
1)Punching machine/mechanical press machine details
| specification |
| Capacity | ton | 60 TON 【600kN】 | Special specification |
| model | | V | H | |
| Rated tonnage point | mm | 4 | 2 | |
| Stroke | mm | 120 | 60 | |
| Max. Die height | mm | 310 | 340 | |
Stroke Per Minute
| s.p.m | 35-90 | 80-120 | |
| Slide adjustment | mm | 75
| |
| Area Of Slide | LR×FB | 500 ×360 X70 | |
| Area Of Bolster | LR×FB | 900 ×500 X80 | |
| Main Motor | KW×P | 5.5 ×4 | |
| Max. upper die weight | kg | 340 | |
| Accuracy | | JB/T 6580-93【JIS 1】 | |
Color
| | Standard | |
| Standard accessories | | Optional accessories | |
| Human Machine Interface(Preset Counter,Forejudge Counter,Angle
Indicator,Speed Indicator) | 1 set | | ○ |
Jet air electromagnetic valve | 1 set |
| Inverter(include Motor positive inversion) | 1 set | | ○ | Die Cushion Device | 1 set |
| ○ | Slide knock-out device | 1 set |
| Electric Cam | 1 set | | ○ | Photo-electronic safety device | 1 set |
| Hydraulic over-load protector | 1 set | | ○ | Foot switch | 1 set |
| Manual slide adjusting device | 1 set | | ○ | Power supply | 1 set |
| Manual butter lubricant system | 1 set | | ○ | Anti-Vibration press mount | 1 set |
| Counter balance device | 1 set | | ○ | Quick die change device | 1 set |
| Crank angle indicator | 1 set | | ○ | T’s operation desk | 1 set |
| Die height indicator (0.1mm) | 1 set | | ○ | Die room light | 1 set |
| Misfeed Detection Consent | 1 set | | ○ | Straightener | 1 set |
| Against over-run safety device | 1 set | | ○ | Feeder | 1 set |
| PLC | 1 set | | ○ | Uncoiler | 1 set |
| Air source receptacle(1/2”) | 1 set | | ○ | Electrical Automatic Lubrication System | 1 set |
| Air Source tie-in (1/2”) | 1 set | | | | |
| Maintenance Tool box | 1 set | | | | |
| Operation Manual and precision checking list | 1 set | | | | |
2) other accessories for the cap making
cap punching die with 5 cavity---it means one stroke, we can get 5
caps, max we can produce 16 caps
2-Cap aluminum coil holder frame
Aluminum coil brush oil
-Blow cap
pull coil material servo control system
Pull coil material and waste material coiling
separate aluminum cap and waste ring,The caps come out, the waste
rings stay in this cabilet
Die protection system: during punching, it can protect die, if any
cap is wrong, this system will stop the machine to protect die
